June 1, 2024
The Latest June 2024 GUNPLA Lineup!
Six items including the MG Sinanju Stein (Narrative Ver.) Ver.Ka and HG Infinite Justice Gundam Type II go on sale!
Going on sale on Saturday, June 29, 2024 / 8,800 JPY (tax incl.)
The Sinanju Stein, the MS that can be described as an uncut gemstone (Stein) for full- Psycho-Frame machines that led to the RX-0 series, has been updated into a Ver.Ka kit with designs based on its appearance in Mobile Suit Gundam Narrative.
The engravings, features unique to units used by the Sleeves, have been reproduced with parts division. The chest section with decorations is a cockpit hatch and its opening and closing gimmicks have been recreated, and the chest block can move up and down.
The Beam Axes can be connected and equipped as a long Beam Naginata, and the beam parts can be attached while the Axes are attached to the shield. Its main armaments such as the High Beam Rifle and Bazooka have been updated with gimmicks unique to the Sinanju.
The movable mechanisms are built into the elbows and knees, The Beam Saber racks have gimmicks where the grips lift up, and the leg thrusters move independently. Emotional Manipulator SP hand parts with independently moving fingers are included, as well as two types of Zoltan Akkanen figures (sitting/standing) and newly designed water decals unique to this Ver.Ka edition.
The Sinanju Stein, the MS that can be described as an uncut gemstone (Stein) for full- Psycho-Frame machines that led to the RX-0 series, has been updated into a Ver.Ka kit with designs based on its appearance in Mobile Suit Gundam Narrative.
The engravings, features unique to units used by the Sleeves, have been reproduced with parts division. The chest section with decorations is a cockpit hatch and its opening and closing gimmicks have been recreated, and the chest block can move up and down.
The Beam Axes can be connected and equipped as a long Beam Naginata, and the beam parts can be attached while the Axes are attached to the shield. Its main armaments such as the High Beam Rifle and Bazooka have been updated with gimmicks unique to the Sinanju.
The movable mechanisms are built into the elbows and knees, The Beam Saber racks have gimmicks where the grips lift up, and the leg thrusters move independently. Emotional Manipulator SP hand parts with independently moving fingers are included, as well as two types of Zoltan Akkanen figures (sitting/standing) and newly designed water decals unique to this Ver.Ka edition.
Going on sale on Saturday, June 29, 2024 / 3,080 JPY (tax incl.)
The Infinite Justice Gundam Type II from Mobile Suit Gundam SEED FREEDOM joins the HG lineup. The silver sections are made using Realistic Metallic Gloss Injection, a method that enhances the metallic luster of the materials.
It adopts the SEED Action System in its internal structure, which specializes in recreating iconic action poses from the Mobile Suit Gundam SEED. The legs have additional rotation axes, enabling leg-bending poses seen in the series.
The four wings on the backpack can be individually deployed and moved up and down. Beam effects that can be attached to the wings are also included, and the backpack can be detached and enjoyed in individual displays.
A wire to reproduce the fired state of the anchor and effect parts that can be attached to the top of the head are also included. This kit comes with a wide variety of armaments such as Beam Sabers and a Beam Shield, and the Beam Boomerang mounted on the shield can be removed and held with the hands.
The Infinite Justice Gundam Type II from Mobile Suit Gundam SEED FREEDOM joins the HG lineup. The silver sections are made using Realistic Metallic Gloss Injection, a method that enhances the metallic luster of the materials.
It adopts the SEED Action System in its internal structure, which specializes in recreating iconic action poses from the Mobile Suit Gundam SEED. The legs have additional rotation axes, enabling leg-bending poses seen in the series.
The four wings on the backpack can be individually deployed and moved up and down. Beam effects that can be attached to the wings are also included, and the backpack can be detached and enjoyed in individual displays.
A wire to reproduce the fired state of the anchor and effect parts that can be attached to the top of the head are also included. This kit comes with a wide variety of armaments such as Beam Sabers and a Beam Shield, and the Beam Boomerang mounted on the shield can be removed and held with the hands.
Going on sale on Saturday, June 29, 2024 / 1,980 JPY (tax incl.)
The Gundam Calibarn from Mobile Suit Gundam THE WITCH FROM MERCURY joins the SDCS lineup.
The rainbow glow of its Shell Units seen when the MS exceeds Permet Score Eight, as well as the non-luminous dormant state and the red glow of Permet Score Five can be recreated.
The Bit-On Form where the Bit Staves are attached throughout the body can also be reproduced. The legs have points of articulation and can be transformed into their High Maneuver Mode configuration.
The Quadra Thrusters at the rear end of the Variable Rod Rifle can be deployed or folded. Weapon-gripping hand parts and expressive open hand parts for each side are included.
Furthermore, the SD Frame can be used to enjoy the SD proportions while the CS Frame can be used to create a kit with tall proportions and a wide range of articulation. By rearranging the frames and parts, you can reproduce the Calibarn with various silhouettes and proportions.
The Gundam Calibarn from Mobile Suit Gundam THE WITCH FROM MERCURY joins the SDCS lineup.
The rainbow glow of its Shell Units seen when the MS exceeds Permet Score Eight, as well as the non-luminous dormant state and the red glow of Permet Score Five can be recreated.
The Bit-On Form where the Bit Staves are attached throughout the body can also be reproduced. The legs have points of articulation and can be transformed into their High Maneuver Mode configuration.
The Quadra Thrusters at the rear end of the Variable Rod Rifle can be deployed or folded. Weapon-gripping hand parts and expressive open hand parts for each side are included.
Furthermore, the SD Frame can be used to enjoy the SD proportions while the CS Frame can be used to create a kit with tall proportions and a wide range of articulation. By rearranging the frames and parts, you can reproduce the Calibarn with various silhouettes and proportions.
Going on sale on Saturday, June 29, 2024 / 1,210 JPY (tax incl.)
The Launcher Striker and Sword Striker from the Mobile Suit Gundam SEED series are now available as newly designed Option Parts.
The Agni can be moved on ball joints and 3mm joints. The Panzer Eisen can be displayed in its deployed state using the included wire.
Joint parts that can be used to attach the parts to different kits are included, and the Launcher Strike Gundam and Sword Strike Gundam can be recreated by combining them with the kits such as the ENTRY GRADE Strike Gundam (sold separately). The Perfect Strike Gundam can also be reproduced using the Option Parts Set Gunpla 01 (Aile Striker) .
The Launcher Striker and Sword Striker from the Mobile Suit Gundam SEED series are now available as newly designed Option Parts.
The Agni can be moved on ball joints and 3mm joints. The Panzer Eisen can be displayed in its deployed state using the included wire.
Joint parts that can be used to attach the parts to different kits are included, and the Launcher Strike Gundam and Sword Strike Gundam can be recreated by combining them with the kits such as the ENTRY GRADE Strike Gundam (sold separately). The Perfect Strike Gundam can also be reproduced using the Option Parts Set Gunpla 01 (Aile Striker) .
Going on sale on Saturday, June 29, 2024 / 660 JPY (tax incl.)
Build Hands Edge, a set of hand parts with angular designs that enhance expressive features of action poses, is here.
It includes a total of 36 hand parts and consists of two sets of three types of left and right hand parts: closed fists, open hands, and weapon-holding hands in three sizes (S, M, and L).
The closed fists are perfect for hand-to-hand fighting poses and displays where Mobile Suits are not armed with weapons. The open hands come with movable wrists, allowing you to enjoy various expressive poses.
The weapon-holding is compatible with 4mm x 2mm weapon grips and 3 mm-diameter saber grips.
Build Hands Edge, a set of hand parts with angular designs that enhance expressive features of action poses, is here.
It includes a total of 36 hand parts and consists of two sets of three types of left and right hand parts: closed fists, open hands, and weapon-holding hands in three sizes (S, M, and L).
The closed fists are perfect for hand-to-hand fighting poses and displays where Mobile Suits are not armed with weapons. The open hands come with movable wrists, allowing you to enjoy various expressive poses.
The weapon-holding is compatible with 4mm x 2mm weapon grips and 3 mm-diameter saber grips.
Going on sale on Saturday, June 29, 2024 / 660 JPY (tax incl.)
Build Hands Round, a set of hand parts with rounded designs that enhance expressive features of action poses, is here.
It includes a total of 36 hand parts and consists of two sets of three types of left and right hand parts: closed fists, open hands, and weapon-holding hands in three sizes (S, M, and L).
The closed fists are perfect for hand-to-hand fighting poses and displays where Mobile Suits are not armed with weapons. The open hands come with movable wrists, allowing you to enjoy various expressive poses.
The weapon-holding is compatible with 4mm x 2mm weapon grips and 3 mm-diameter saber grips.
Build Hands Round, a set of hand parts with rounded designs that enhance expressive features of action poses, is here.
It includes a total of 36 hand parts and consists of two sets of three types of left and right hand parts: closed fists, open hands, and weapon-holding hands in three sizes (S, M, and L).
The closed fists are perfect for hand-to-hand fighting poses and displays where Mobile Suits are not armed with weapons. The open hands come with movable wrists, allowing you to enjoy various expressive poses.
The weapon-holding is compatible with 4mm x 2mm weapon grips and 3 mm-diameter saber grips.
* This article was originally published in Japan. Availability & timing may vary by region.
RANKINGS
Related Links
RECOMMENDED POSTS
Enable cookies to see recommended articles for you